Your Trusted 24 Hours Service Provider!

Reflex Level Indicators​

Reflex Level Indicators
JMI manufactures Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer serviceability in the domestic as well as international market. WORKING PRINCIPLE Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90°. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night, an artificial light must be provided. APPLICATION Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading. Reflex level gauges cannot be used in certain cases for example:
  • When the separation level between two liquids has to be read (interface).
  • When besides the level indication, the observation of the liquid colour is required
  • When the process fluid is high-pressure water steam since in this case, the glass must be protected from the solvent action of the boiler water by using mica shields
  • When the process fluid is such that can corrode the glass (e.g. high temperature alkaline solutions or hydrofluoric acid), since ICA shields or Poly Trifluoro chloroethylene shields must be used to protect the glass.
Related Products
BCF Theme By aThemeArt - Proudly powered by WordPress.
BACK TO TOP